We can provide your most effective coordination plan of your building construction materials project in the shortest time.

English
CBM

Daily maintenance of ceramic tiles

by:CBM     2021-06-13

Cleaning the tiles regularly can not only keep the surface of the tiles shiny and prolong the service life of the tiles, but also make your home look more beautiful and generous. So how should we clean and maintain ceramic tiles in our daily home life? Let's take a look with the editor below, the knowledge of ceramic tile cleaning and maintenance.

Prevent cracking:

Do not use metal sharps, glass ceramics, iron nails and other hard objects to hit or rub the ground in daily use. Do not drag weight objects back and forth on the ground. So as not to scratch the glaze and affect the appearance.

Surface cleaning:

1. When cleaning and mopping the floor daily, please use dry mopping as much as possible instead of wet mopping. Open the doors and windows immediately after cleaning, let air circulate, and dry the moisture on the tiled wall. In the humid summer weather, wipe it again with a dry cloth, and then turn on the air conditioner to dehumidify.

2. For general stains, household cleaners such as detergent, washing powder, etc. or detergents can be used for cleaning. Vitrified tiles can be wiped directly with a dry cloth or dampened with water.

3. For sticky gelatinous or solid stains, it is not advisable to use hard brush cleaning tools, such as shovel, steel brush, etc. to forcibly hang the brush. According to the nature of the stain, choose a suitable cleaning agent to remove it. Several treatment methods for common stains are as follows:

Use sodium hypochlorite diluent (bleaching agent) for stains such as tea stains, fruit stains, coffee, sauce vinegar, leather shoe prints, and soak for 20-30 minutes before use. Wipe clean with a cloth. Some stains that have penetrated into the bricks for a long time need to be soaked for several hours;

The mold spots formed by ink and antifouling wax mold, use sodium hypochlorite diluent (bleaching agent). When using, just apply the bleach to the stain and soak it for a few minutes to wipe it off;

Use hydrochloric acid or phosphoric acid solution for cement, scale, rust and rust spots, and wipe it several times;

Use alkaline cleaners or organic solvents (5-ketone, triethylene) for paint, oil stains, oily markers, and surface antifouling wax layer, paint and grease removal agents;

Contamination method: first soak in 20%-40% sodium hydroxide solution for 24 hours and then wipe it with a cloth, and then soak it with 30%-50% hydrochloric acid solution for 30 minutes and then wipe it with a cloth;

Ice cream uses alkaline cleaner;

Lime scale uses acidic cleaner.

Note: Acid-base cleaners can effectively remove stains on the surface of the tile, but since the acid-base components may cause corrosion on the surface of the tile, it should not be used frequently, and the acid-base value should be used more. It is a neutral cleaning agent; you need to wear rubber gloves when using the above decontamination agents; after removing the stains, you should scrub the brick surface with clean water and dry it immediately without leaving water stains.

Gap treatment:

The main raw materials for the crevices of the tiles are putty and white cement. Where dirt and bacteria accumulate, special attention should be paid to cleaning and maintenance. After the tile is laid and the daily cleaning is completed, you can use a brush to brush a water-repellent agent in the gap, which can play a role in waterproof and mildew proof. The gaps that are often easily stained with stains can also be smeared on the joints of the tiles with candles to prevent excessive stains from adhering in advance.

Note: After laying the tiles, paste the anti-oil stickers on the tiles that may be heavily stained with oil around the cooker, range hood, etc., and use the beautifying agent on the gaps of the tiles and apply them on the tiles. The joints are both beautiful and oil-resistant.

Wear repair:

The surface of the ceramic tile is often uneven due to friction, accumulation and other problems, such as a slight slight appearance on the surface of the tile To repair the scratches, apply toothpaste on the scratches and wipe vigorously with a soft dry cloth.

Waxing floor tiles (polished tiles) regularly can have a long-lasting protective effect, with a time interval of 2 to 3 months, which can effectively restore the surface gloss of the tiles and prolong the service life of the tiles. When waxing the floor tiles, clean the stains and then wax surface treatment. Apply the wax evenly on the floor tiles. Generally, let it dry within 8 hours after waxing. It is not suitable to trample on the surface to prevent leaving marks.

If there is a small damage on the edge or the middle of the tile, you can paste the small part of it with white latex.

Ceramic tile products have more and more applications in modern home decoration. The design, material and style of brick products are more and more important to consumers. Customers are buying tiles The product process is also more cautious. However, for most people, it takes years or even decades to use for decoration at a time. Compared with choosing ceramic tiles once, cleaning and maintenance in the later stage is more important. Improper maintenance may cause damage, scratches, falling off and other problems to the tiles, shortening the life of the tiles, so we should pay attention to it in our daily home life. Good cleaning and maintenance of ceramic tiles.

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for your enquiry. We will get back to you ASAP