- Faucet & Drainer & Valve
- Flooring Material Types
- Wall Coverings
- Bathroom Fittings
Five important factors to pay attention to when laying tiles in the living room!
1. The specifications of the tiles
If the area of u200bu200byour living room is more than 30 square meters, then you can consider using 80*80 floor tiles when choosing the tile specifications. If the area of u200bu200byour living room is less than 30 square meters For meters, the editor suggests that you can choose floor tiles below 60*60, but try not to use floor tiles below 60*60. If small-size tiles are used in a large area, it will seem that the entire space is very crowded. On the contrary, if you choose large-size tiles in a small space, it will also make people feel a sense of incongruity, so it is better to choose suitable tiles for paving.
First of all, the decoration of the living room will give people a comfortable, bright and natural feeling, so It is relatively appropriate to choose lighter-colored tiles. For example, you can consider using light beige, white, solid color, or types of tiles with small patterns.
Living room floor tiles are full-body tiles. The main reason is that they are more wear-resistant and bright in comparison. The important thing is that this kind of tiles is easier to clean. . Of course, there are also some owners who like to use antique bricks. The antique bricks look pretty good, but it will be more difficult to clean them.
Simplicity and smoothness are the eternal purpose of home decoration. The same is true for floor tiles in the living room. . The choice of skirting line can be said to be a major difficulty in tile paving. We know that most of the walls are painted with paint. Generally, the place where the paint and the ground are in contact is also the place where people usually kick it. If you don't install baseboards, it will accumulate for a long time and it will easily cause pollution or damage to your wall.
5. Maintenance after tile laying
Before the tile laying in the living room, it is recommended to soak the tiles in water for more than two to three hours. What is done is to allow the tiles to absorb enough moisture before they can be laid, and the tiles that have absorbed enough moisture will not have those hollowing, falling off, and loose sticking after they are laid.