How to choose tiles for house decoration?


Floor tiles are the most used for house decoration on walls and floors. Floor tiles with high-value looks are also popular in practical terms. However, there are many brands of floor tiles on the market, so what should we say about floor tiles? How to choose?

1. Look at the corners

When buying floor tiles, we can align the two ends of the two tiles together and check whether the corners are neat and the error value is If it is not within the specified standard value, you can also use a ruler to compare the diagonal lengths of the tiles to see if they are the same.

Background wall-1200*2400

2, observe the surface of the tile

The gloss of the surface of the floor tile is particularly critical , This can see the pros and cons of the floor tiles facing the light and the degree of reflection. The quality of floor tiles can also be seen. Of course, the chromatic aberration, deformation, few edges and corners of the tiles, and the flatness of the floor tiles are also critical.

3. Listen

Good floor tiles on the market will make a crisp sound when tapped, because the floor tiles have good hardness. Conversely, if you can’t hear a crisp sound when the tiles are tapped, it means that the floor tiles are not up to the standard when they are burnt, and it is best to choose carefully.

4. Look at the water absorption rate

The water absorption rate is also a key factor in distinguishing the quality of floor tiles. Because the lower the water absorption rate, the stronger the watch time can be, and the hollowing phenomenon can be reduced to a certain extent. It is best to pour a small glass of water on the back of the floor tiles and observe their water absorption. If the water disappears quickly, it means that the water absorption rate is high. This kind of floor tiles are prone to cracking and damage during paving.

Large-size continuous pattern tiles-1200*2400

5. Look at the cleanliness

When it comes to the cleanliness of floor tiles, I believe everyone may feel a little strange, in fact, the cleanliness of the floor tiles directly affects the cleaning problems in the later stage. When choosing, we can use a big pen to paint a few strokes on the surface of the floor tiles. Take a look at the fluency and see if there are intermittent phenomena. Wait for a few minutes and then wipe it with a wet towel. Can you wipe it clean immediately?

6. Wear resistance coefficient

Abrasion resistance is also one of the key parameters of floor tiles, generally divided into 5 degrees, from low to high, five degrees is the most wear-resistant For use in some large-scale construction sites, but for home decoration, the wear resistance coefficient can be selected from 1-4 degrees.

Slab tile-1200*2400

7. Pay attention to color difference, pay attention to after-sales treaties

There are many types of floor tiles on the market There are also big differences between prices. It is best not to just be cheap when choosing. It is best to choose some brand of floor tiles, so that both in terms of quality and after-sales, there is a good guarantee.

Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English