How to distinguish the quality of tiles?


Ceramic tiles and floor tiles or wall tiles are used for decoration. The pronunciation of the two is the same, so many consumers can’t distinguish between the two, let alone know the essential difference between the two. Today The editor will introduce the difference between ceramic tiles and ceramic tiles, and also explain how to distinguish the quality of tiles. Let’s take a look.

The difference between tiles and ceramic tiles

1. From the perspective of craftsmanship: ceramic tiles are fired with clay The water absorption rate is high, the water absorption rate is above the glaze, and the magnetic strength is low. The ceramic tiles are made of porcelain clay, and are also glazed in order to achieve a decorative effect. This ceramic tile has a strict structure, high strength, low water absorption, and strong stain resistance.

2. In terms of price, the price of tiles is higher than that of tiles. At present, tiles are mainly used in the habitual use of the public, and they are both in the industry. No distinction is made. The key to its future development is to see whether our entrepreneurs are still keen to follow Hong Kong and Taiwan in their words and deeds as they were at the beginning of reform and opening up.

How to identify the quality of ceramic tiles

1. Look at the hardness of the ceramic tiles-ceramic tiles with high hardness are not easy to be damaged. Use The years are long. In the process of selecting tiles, tap the tiles to listen to whether the sound is crisp. The crisper the sound, the higher the texture density and the better hardness of the tiles.

2. Measure the size of a tile-the standard size of a tile has clear regulations. If the result obtained after we measure the brick body is different from the value indicated on the product, It means that such products are inferior products. Check the specifications and sizes one by one. Products with a size error of more than 0.5 mm and a flatness of more than 0.1 mm will not only increase the difficulty of construction, but also greatly reduce the effect of decoration.

3. Check the water absorption rate of tiles-high-quality wall and floor tiles have very low water absorption rate. When purchasing, if the water absorption rate is not indicated on the wall and floor tiles, you can place the tiles on the ground with the reverse side up, sprinkle some water on the back of the wall and floor tiles, and distinguish the quality of the tiles by observing the spread of water drops after a few minutes: Quickly, it means that water is absorbed and the texture of the tiles is poor.

4. Listen, by tapping on the tiles, and by listening to the sound to identify the quality of the tiles. Wall tiles or small-size tiles are generally separated with one hand and five fingers, and held up Tile, tap the face of the tile with the other hand. If the sound is metallic, the quality of the tile is better. The floor tiles use one hand to lift one side of the tile, and use the upper part of the palm of the other hand to hit the middle of the tile. If the sound is thick and the echo is long like the sound of striking a bronze bell, the porcelain level of the tile is higher. Strong wear resistance, high flexural strength, low water absorption, not easy to be polluted, if the sound is muddy and there is no echo, the degree of porcelainization is low (even cracks), the ceramic tile body is not fully calcined, poor wear resistance, and flexural resistance The strength is low, and the water absorption rate will be higher, so it is easy to be polluted.

The above is an introduction to the difference between ceramic tiles and ceramic tiles, and how to distinguish the quality of ceramic tiles. I hope everyone can distinguish them through the above methods.

Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English