Stainless steel faucet prices | the installation of stainless steel faucets on different occasions

2021/06/18
In the bathroom, in the kitchen, it is inevitable to use stainless steel faucets, but stainless steel faucets require different installation methods on different occasions, and I will talk about these methods below.

1. Thermostatic faucet:

Before installing the thermostatic faucet, please check whether the water pipes are hot on the left and cold on the other. Remember not to connect the hot and cold water pipes wrongly, so as to prevent the faucet from not working normally;



2. Shower and bathtub faucet (wall hanging):

After you buy a shower, bathtub, or wall-mounted stainless steel faucet, you can choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes must reach 15 cm;

Concealed shower and bathtub faucets: After purchasing a concealed faucet, the valve core of the faucet is generally pre-buried in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the spool will not be embedded. Do not remove the plastic protective cover of the valve core easily during pre-embedding, so as to avoid damage to the valve core by cement and other chores during pre-embedding. In addition, you should pay attention to the up and down, left and right directions of the spool when embedding the spool, so as not to embed the spool incorrectly. When the wall-mounted faucet is embedded in the water inlet pipe, there is a deviation in the size, and the adjustable crutches can be used to adjust the position;



Three, single hole basin:

35 work points from the basin down is the most suitable. During installation, a special angle valve must be selected, and the angle valve must be fixed to the hot and cold water pipes out of the wall. When you find that there is a distance between the angle valve and the water pipe on the faucet, buy a special extension pipe to connect;



Four. Single hole kitchen:

The frequency of use of kitchen faucets is high, and stability is required, and the lock nut must be tightened.



These are the different installation methods of stainless steel faucets on different occasions. After you know this knowledge, you can install it correctly. If you have any questions, you can go to our company for inquiries, and we will serve you wholeheartedly.





Minmetals Sanitary Ware https://www.cbmindustry.com/Guangdong stainless steel faucet manufacturer, stainless steel faucet brand, stainless steel faucet price, stainless steel faucet wholesale
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
English
Current language:English