Tips for post-maintenance of polished tiles!

The refurbishment method of polished tiles is basically the same as that of marble, but it is necessary to use a heavy-duty stone refurbishment machine with 50#---3000# water abrasive pad polishing seven procedures, use the granite polishing method for low-speed, low-pressure polishing, and then do Antifouling treatment of water-based antifouling agent, crystal surface treatment. The crystal surface is treated with a neutral polishing tile special crystal surface agent. If acidic marble crystal surface slurry, crystal surface mud, crystal surface agent, etc. are used, the surface of the polished tile will be unclear. Although there is a certain degree of brightness, it is quite fuzzy , There is a hazy feeling like the surface of the object is oiled, only after the neutral polished tile crystal surface agent is used, the high-gloss, mirror and clear effect of the original polished tile will appear when it leaves the factory.

1. Regular neutral detergent cleans the surface and removes general stains. Do not use any strong acid detergent. The cleaning effect of the toilet is indeed very good at the time, but at the same time It also burned the surface of the crystal layer of the polished tile and enlarged the pores. From the second day on, it became darker and darker because the surface layer had been 'burned out' and was not stain-resistant.

2, neutral crystal face agent crystal face care.

3. Special stains such as tea stains, fruit stains, coffee stains, ink stains, etc. High purity H2O2 with a content of 27.5% or more can be used with paper towels to cover and soak It can be cleared in 2-3 hours. (Note: H2O2 should not be in direct contact with the skin and should be operated with rubber gloves.)

1. After the polished tiles are laid, they are not used. In order to avoid damage to the surface of the tiles during the construction of other projects, use a woven bag Protect the items that are not easy to discolor, and cover the brick surface.

2. If you need to use a nailing air compressor on the paved brick surface, use wooden boards and other objects to cushion the air compressor, and it is strictly forbidden to directly contact the wheels of the air compressor Brick surface to avoid the impact on the brick surface caused by the vibration of the air compressor.

3. Please use dry mopping as much as possible when cleaning and mopping the floor daily, and use less wet mopping. If the part is dirty or stained, household cleaners, such as detergent, Wash detergent or use Dongpeng decontamination agent, and apply floor wax regularly or irregularly according to the usage, and polish it after it dries to keep the brick surface as bright as new. If the economic conditions are better, please use crystal surface treatment to achieve the hotel effect.