I found that many people didn’t know the difference between wall tiles and floor tiles. The two were stupidly distinguished, thinking that there is only a difference in size between wall tiles and floor tiles, so they put the floor tiles and the wall tiles together. Mix and match collages. The effect is cool, but there are also a lot of problems~ Today, the editor came to literacy for everyone, telling everyone where to put tiles in the house!
Wall tiles and floor and brick walls are used in interior decoration to protect and beautify the house. To say the difference, interior wall tiles decorate the interior walls, which can avoid problems such as wall damage, splashing or pollution; floor tiles are also called floor tiles, which can be used to decorate the ground to create a bright and beautiful living environment.
In addition to the different places used, the difference between wall tiles and floor tiles is mainly in terms of water absorption. Floor tiles are not suitable for walls, and wall tiles are also not suitable for paving the ground. Strictly speaking, wall tiles are ceramic products, and floor tiles are usually porcelain products. Their physical properties are different. The two are very different from the selection of clay ingredients to the firing process. The water absorption rate of wall tiles is about 10%, which is more than water absorption. Floor tiles with a rate of only 1% are several times higher. If wall tiles are placed on the ground, the ground will not be easy to clean because it absorbs too much water. Moreover, the wall tiles are made of glazed pottery, which has a relatively high moisture content, and its back is generally rough, which is also conducive to the adhesive to stick the wall tiles on the wall. Floor tiles are not easy to stick firmly on the wall, and wall tiles will absorb too much water when used on the ground and become difficult to clean. It can be seen that the wall and floor tiles cannot be mixed. Speaking of this, do you understand that wall tiles and floor tiles are really not what you want to paste.
A big stubborn stain in the kitchen is oil, and it can slowly penetrate into the tiles year after year. Once it penetrates, it is really hopeless. So be cautious when choosing kitchen tiles. Don't choose bricks with uneven surfaces. Long-term use of dirt and accumulation in the kitchen is harmful to your health. The editor here suggests that you can choose bright glazed tiles for kitchen wall tiles, which are not easy to be polluted by oil smoke and are easy to clean. For floor tiles, choose a matte surface, which can reduce the risk of slipping caused by wet kitchen floors.
The toilet is a place where water often accumulates. When choosing bathroom tiles, pay attention to the water absorption rate. The lower the water absorption rate, the better. To add, the kitchen is also a place that often needs to be cleaned, and the same is true. Tiles with high water absorption are likely to cause the tiles to be damp for a long time and fall off. Therefore, the editor also recommends that you can also choose glazed tiles for the bathroom wall. Because this brick has low water absorption and high strength, it can also prevent the growth of bacteria. However, the smooth and beautiful vitrified tiles are also a good choice. As for the decoration of the wet and slippery floor of the bathroom, you can use full-body tiles or matt tiles to decorate the bathroom to play a non-slip effect.
I want to let everyone know the characteristics of wall tiles and floor tiles. I’m not happy that the wrong place will cause trouble in my life. As for the more 'peaceful' places such as the living room and bedroom, you can choose what you like based on the characteristics of the tiles introduced by the editor above.